Downstream Oil & Gas, Skid-Mounted Modular Process Systems

Engineered to Suit Your Needs


IFS is a process engineering firm that builds a wide range of modular systems for the Downstream Oil & Gas Refining industry. All of our products are skid-mounted and ready to "plug-in." Our engineers will build-to-suit according to your exact specifications and can install your completed modular system anywhere in the world.
  
Below are some examples of what we can do for you.

HCGO

Hot Coke Gas Oil Filter
(HCGO-100.0)
Designed to filter particulate from the heavy coker gas oil before entering the catalytic cracker

Coke Particulate Filtration Package
(HCGO-200.0)

Designed to filter particulate from the heavy coker gas oil before entering the catalytic cracker in a modular package which includes filters, valves, piping, & controls all assembled,  mounted, & tested on a structural steel skid.

Lube Oil Blending Package

Lube Oil Blending Package
(PLBS-100.0)
Designed to blend solid or granular polymers in a liquid base material. Typical applications include blending finished products such as motor oil base stock, asphalt extenders, paint and adhesives.

VRSP

Vapor Recovery Package
(VRSP - 100.0)

Designed, packaged and fully tested for a wide range of vapor recovery applications. The complete system includes a process simulation using Aspen Plus® and Aspen Dynamics® process equipment, instruments, valves, & piping integrated on a skid.

Heat Transfer/ Hot Oil Packages

Heat Transfer / Hot Oil Package
(HTHO-100.0)

Designed to store/heat/circulate Heat Transfer Fluids which are used for indirect heating of combustible liquids and gases.

Fuel Gas Conditioning Package

Fuel Gas Conditioning Package
(FGCS – 100.0)

Designed to remove solids, liquids, and aerosols from natural gas. Aspen Plus Process Simulation is used to insure the gas is heated to 50 degrees F above the dew point.

FGCS

Fuel Gas Conditioning Membrane Package
(FGCS-300.0)
Designed for Natural Gas Liquid, H2O, H2S (for "Gas Sweetening") & CO2 removal from a Natural Gas Stream.

Black Powder Filtration System
(BPFS – 100.0)

Designed to remove Iron Sulphide, Iron Oxides and other contaminates from gas transmission lines
Nitrogen Filtration System - Ifsolutions.com Nitrogen Generation System Packages
(N2GS-100.0)

Designed to deliver continuous supply of 95% - 99.95% pure nitrogen gas. Solutions for high ambient temperatures, fixed dew point control for buffer gas, coil tubing for well servicing and export line commissioning.

Super Sump Industrial Grade Sump Package
 

Open/Closed Drain Sump Package
(PSSS – 100.0)

Designed to collect flammable/toxic liquids (closed drains) or non-flammable liquids (open drains) from refinery runoff in a single or double wall sump with leak detection.  Automatic level controls start/stop pumps which transfer the waste for further handling.

IntegraHeat ™ Electric Process Heating Package

IntegraHeat™ Electric Process Heating Package
(IEPH – 100.0)

Designed to electrically heat hydrocarbons (natural gas for dew point control or crude oil for viscosity reduction). Accurate temperature control...

Electric Process Heater Control Panel

Electric Process Heater Control Panel
(CP6012 – 100.0)

Offers convenient, economical control of resistive loads. Completely eliminates the engineering, design, component procurement, assembly and testing steps required to build a control panel

Automation and Controls

Automation & Controls
(PACS – 100.0)

Monitors and controls IFS packaged equipment. The controls can be skid-mounted and prewired or remote mounted in an unclassified area.

 

For a Skid-Mounted Downstream Oil & Gas Modular Process System, call us at 1-800-795-4068 or send us an email.

Let us build yours.