Category: Production Storage & Measurement

Predict-Plus Remote Pump Monitoring System – Avoid Downtime Today!

Written by Welcome on April 23, 2019
remote pump monitoring system

PumpWorks, a DXP Company, just launched an updated version of their Predict-Plus pump monitoring system. As leading modular process skid manufacturers for Midstream O&G, IFS uses PumpWorks Pumps on our Midstream packaged products. We’re excited to offer the Gen 2 Predict-Plus pump health monitoring tool. Do you want to know your critical LACT units are […]

IFS Supplies 30”, 20” & 16” Metering Packages for Major Midstream Company

Written by Welcome on March 5, 2019
metering package for gray oak pipeline

A major Midstream company approved the construction of a new crude oil pipeline, spanning from the West Texas Permian Basin to the Gulf Coast. The pipeline will create reliable access to crude oil in the region, bringing more growth to the Texas energy industry. The current pipeline route will run 850 miles from the Permian […]

Control Valve vs. Regulators for Gas Pressure Reduction? – How to Decide

Written by Welcome on November 27, 2018
control valve vs. regulator

Pressure regulators and pressure relief or control valves are important instruments in the oil and gas industry used for the same purpose – automated fluid control. However, the two instruments differ fundamentally in operation and design. It is important for operators, engineers, and other relevant stakeholders to understand the differences between these devices in order […]

What Is NGL? – Measurement Techniques

Written by Welcome on November 20, 2018
what is NGL?

Following the U.S. shale boom which saw the country become a major producer of oil and gas, production of Natural Gas Liquids from the gas component also proliferated. The prices of these products correlate closely with the crude oil price on the market. Due to the huge demand for these products on a global scale […]

What Is a Coriolis Flow Meter in O&G, and How Does It Work?

Written by Welcome on October 30, 2018
Coriolis mass flow meter

Within the oil and gas industry, there are a number of different options for metering flowrate. Over the years, Coriolis flow meters have become increasingly popular for liquid and gas measurement among oil and gas skid manufacturers and users. Although the initial costs for a Coriolis flow meter are higher that some types of metering, […]

Flow Meter Types Used in Midstream Oil and Gas

Written by Welcome on October 25, 2018
flow meters used in petroleum industries

For as long as there has been commercial oil and gas extraction, the industry has faced the challenge of accurate measurement. From allocating production to each well’s stakeholders to monitoring the oil and gas delivered, everyone involved in the oil and gas industry has a vested interest in ensuring flow measurements are correct. Over the […]

IFS Ships Modular Crude Oil Pumping Station

Written by Welcome on March 27, 2018
modular crude oil pumping station

IFS recently completed the design, fabrication, wet testing and shipment of a Modular Crude Oil Pumping Station for Mandaree North Dakota.  The Modular Crude Oil Pump Station included: Welded I-Beam structure Insulated/heated building Integral sump (2) 100% Crude Oil Pumps/electric motors Overhead Bridge crane/hoist Suction/discharge piping Isolation/check valves Control valves Instrumentation Electrical switchgear with Variable […]

Tallgrass Meter Skid for Wyoming Gathering System

Written by Welcome on March 20, 2018

IFS recently supplied a metering skid to Tallgrass Energy in Wright, Wyoming.  The metering package is 11’ wide by 36’ long by 12′ high with an insulated, pre-manufactured enclosure for operation in cold climates.  An explosion proof ROC control system acts as the brains of the metering skid system that manages Input/Output signals in addition to metering […]